Raspberry Pi Zero W Camera case.

thingiverse

This is my version of the case modded by tnw513. https://www.thingiverse.com/thing:1617437 I've added mounting tabs and a cover for the camera flex cable, making it easier to assemble and use. However, during my printing process, I inadvertently bumped the Deltaprintr, causing an offset in the layers that stuck the two halves together. This resulted in damaged edges and a closeup photo shows the issue clearly. Despite this setback, with some brute force, I was able to separate the two halves. Additionally, the RasPiZeroW camera connector clip is broken, so tape is used to hold it together temporarily. The RasPiZeroW is loaded with motionEye code by Calin Crisan and works seamlessly. To set up WiFi without a keyboard or monitor, follow these steps: https://core-electronics.com.au/tutorials/raspberry-pi-zerow-headless-wifi-setup.html Feel free to experiment and play around with it. You can also customize the case by adjusting the covers' alignment or adding a catch to hold both halves together. The boards are held in place by bending the posts slightly, but melting them would be an alternative solution. EDIT: I've added another version with a 16mm hole to accommodate cell phone telephoto lenses. These lenses can be purchased on Ebay for a few dollars. Perhaps someone with more expertise can add a screw thread to attach the lens to the case. See also https://www.thingiverse.com/thing:2770616, which I'm still experimenting with as of 20180126. EDIT 20180803: I've moved the mounting lugs to the back, creating Version 3. You can find this updated version here: https://www.tinkercad.com/things/2bA89GfLX7r-pizerowcamcase3/editv2