Raspberry Pi V2. Camera mount for Prusa i3 MK3

thingiverse

2018/07/11: Step files are now available upon request. Note: The quality of these step files is not my responsibility as I have to rely on someone else to convert them for me. 2018/03/25: A mount has been added for the left side of the printer, M1C, and a shorter stanchion, C3A. Personally, I prefer the view from the shorter stanchion. 2018/03/21: All old revisions have been deleted. 2018/03/19 Update: After examining FourOhFour's creation, I added a clip to secure the ribbon cable and introduced several different arm styles. Based on his feedback, I switched my arm to the m1b version, and marked c4 and m1a as outdated revisions but left them intact in case someone prefers one of those. I also added an arm with a radial slot, m1a, and an arm with a square end and an 18mm wide slot at the end, m1b. I printed all items using the default 2mm fast profile in Slic3r PE, except for lowering jerk to 8 and changing acceleration to 1000 in printer settings, which is simply my personal preference. 2018/03/14: I was dissatisfied with the idea that the ribbon cable exited the top of the camera housing and had difficulty getting the camera housing to stay together on jgeyer's model. Therefore, I decided to create one that would snap together, which is the result. The hole on C3 has been undersized so a nut will not be required, but you'll need to use some force to get the threads started when assembling. All pieces have been designed around an M3x16 hex screw. Additionally, the through holes in the back cover remain open so a drop of superglue can be added to secure the camera case if it doesn't snap together properly.