Raspberry pi tower

thingiverse

You can build a Raspberry Pi stackable tower by stacking all modules in any order without encountering any issues. The available modules are: * Raspberry Pi * Power Supply * HDD 3.5 * HDD 2.5 I am currently using this setup with: * A power supply * Two Raspberry Pi units * An SSD (HDD 2.5) * An HDD 3.5 To print all components without support, I recommend a 20% infill. To build the stackable tower, you will need the following items: * 100pcs M3 12mm+6mm Nylon Spacer Hex Stand-Off Pillar for Motherboard (available on Aliexpress) Specific screws are required for each module: * To create the Raspberry Pi module, you will need four M2.5 screws. * For the HDD 2.5 module, use four M3 screws. * The HDD 3.5 module requires four 6-32 screws. * A power supply unit needs two M3 screws (I am using a 5V 6A metal power supply).