
Raspberry Pi Mount for Leviton Structured Media
prusaprinters
<p>A mounting plate for <a href="https://www.raspberrypi.org/">Raspberry Pi</a> in the official case for <a href="https://www.leviton.com/en/products/residential/networking/structured-media-centers">Leviton structured media panels</a>. I made this to hang Raspberry Pi in the wiring cabinet where the main ethernet switch lives.</p><p>Uses the Leviton <a href="https://www.leviton.com/en/products/47615-nyl">push-lock pins</a>, but you could use wood screws and a washer if the panel was mounted on plywood.</p><p>The RPi cases can be attached to this plate with ¼" #4 wood screws.</p><p>Fusion 360 file provided for modification. The file is parameterized to hopefully make it easier to change width and height if needed.</p><h3>Print Settings</h3><p><strong>Printer: </strong>Ender 3 Pro w/ direct drive</p><p><strong>Rafts: </strong>No</p><p><strong>Supports:</strong> No</p><p><strong>Resolution: </strong>0.15-0.2mm</p><p><strong>Infill:</strong> 15% or higher</p><p><strong>Shells:</strong> 2+</p><h3>Notes:</h3><p>Doesn't need supports if printed flat with back on the build plate.</p>
With this file you will be able to print Raspberry Pi Mount for Leviton Structured Media with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Raspberry Pi Mount for Leviton Structured Media.