Raspberry Pi case with Pi Camera for CR-10

thingiverse

Raspberry Pi Case with Pi Camera for Mounting on CR-10 This project combines several designs found on Thingiverse, and I take no credit for the original designs. Instead, I combined elements that I liked and made minor adjustments to make them work together seamlessly. The case is designed to be compatible with Raspberry Pi 3 B+, as well as other models like Pi 3B/B+, 2B, and 1B+. However, I have not personally tested the compatibility on these devices. For the camera housing, I used an Arducam 5MP (available on Amazon), but the design should fit all Raspberry Pi cameras with similar dimensions. ### Case: The case is based on [Raspberry Pi 3 Case without Vesa mounts by kaanaslan](https://www.thingiverse.com/thing:2647012) and [Ender 3/Cr-10 Raspberry Pi Case by andr123k](https://www.thingiverse.com/thing:3023247). I used the case design from kaanaslan and added the mount from andr123k's design. ### Camera: For the camera housing, I used a combination of [RaspberryPi Cam mount by 2bedom](https://www.thingiverse.com/thing:2703351) and [Pi Zero security camera by T_Hambush](https://www.thingiverse.com/thing:2431114). I adapted the arm from 2bedom's design, but modified the connection to fit the housing from T_Hambush. ### Assembly: The parts are held together with screws, except for the camera house which is a press-fit. To assemble this project, you will need multiple copies of the 20mm mount arm - the number depends on the length of your cable (I printed four). The 90-degree arm is used to attach the case. To complete the assembly, you will need: * 5 M3x12mm screws and nuts for the arms * 3 M3x16mm screws to attach the top and bottom case (the last hole is used for the arm) * 1 M3x28mm screw to mount the arm to the case * 2-4 M2.5x6mm screws to fasten the Raspberry Pi to the case (two should be sufficient)