Raspberry Pi case for Lack enclosure

Raspberry Pi case for Lack enclosure

prusaprinters

<p>This case for my Octopi mounts to the back of the Lack enclosure. It has openings for USB-C and one of the USB-A ports, the SD card, camera ribbon cable, and a cooling fan. I also printed a set of Lack enclosure parts for the right side leg so I could pass wires through that side as well.&nbsp;</p><p>Hardware needed:</p><p>(4) M3 x 8 screws to secure cover(or longer, up to 14mm)</p><p>(4) M2.5 x 6 screws to mount Raspberry Pi</p><p>(4) M2.5 screws to mount fan, length depends on your fan</p><p>(2) #10 wood screws, at least 1" long to mount case to Lack enclosure, or your own similar solution depending on your needs</p><p>* I like to tap holes rather than use nuts, so two metric taps will be needed (M3 and M2.5). I can remix this to use nuts if there's a need.</p><p>I printed this in PETG with supports under a few key areas, 0.2 mm quality, 50% infill</p>

Download Model from prusaprinters

With this file you will be able to print Raspberry Pi case for Lack enclosure with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Raspberry Pi case for Lack enclosure.