Raspberry Pi Camera Stand

prusaprinters

<h3>Raspberry Pi Camera Stand</h3> <p>Because this camera has a large focal distance and fixing the device in the printer frame does not provide the best image. This stand allows other uses to the camera.</p> <h3>Features</h3> <ul> <li>Compatible with the official Pi Camera rev 1.3 and similar designs</li> <li>7 options for camera lens center height - from 5cm to 20cm</li> <li>No hinge in the base - for people who believe and respect the law of gravity</li> <li>Use a 3mm x 20mm bolt or a nail as hinge</li> <li>The case is slighly raised to protect the lens without compromising the view angle</li> <li>This will not deform with time even if installed in the horizontal</li> </ul> <h3>Print instructions</h3><ul> <li>Use supports only to the bed, when printing the pole and the box.</li> <li>Remember that the indicated height is from the bottom to the camera lens, not the pole height.</li> </ul>