Raspberry Pi Camera Mount for 5MP Camera with Lights

thingiverse

I've remixed the Ender 3 v2 Z-Axis mount with the Mini Kossel camera enclosure to allow the high res camera with lights to be mounted on the X-Axis motor on the Z-Axis of the Ender 3 v2. The only model changed was the Camera Back, which can be found in tinkercad here - https://www.tinkercad.com/things/fVf4YspbTTK-pi-camera-back/edit The original creators said this: Camera Enclosure ============== https://www.thingiverse.com/thing:434600 This case and mount for alternate version of Raspberry Pi Camera Kit. Main different for this camera module support changeable lens and optional IR lens. For the case , it have two version. One is for camera module only. One is for camera module with IR or 1W LED . For the mount. I design two version. One is mount the camera on standard tripod (1/4 inch nut). One is mount on 2020 or 1515 aluminum extrusion. More information on this camera module , please check in here: http://www.mini-kossel.com/Electronics/pi-camera-module http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=181501216262 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=181501237185 Instructions For camera case. 4x M3x16mm screw 4x M3 nut For Tripod Mount 1x 1/4 inch nut For aluminum extrusion Mount 2x M3 Nut 2x M3x10mm Screw For arm using M3 x8mm screw and M3 Nut Mounting Arm =========== https://www.thingiverse.com/thing:3294512 Inspired by the camera mount designed by Modmike (https://www.thingiverse.com/thing:2886101) which I printed but couldn't get to fit, I decided to draw my own version. Its a little bit chunkier (the bracket), and the camera enclosure should fit a Raspberry Pi camera V2.1 easily. Doesn't need any support or rafts etc. Requires a couple of M3 x 15mm hex bolts Camera bracket: Print this upside down so that the flat part that sits against the QR code sticks up Camera back: Print this flat side down Camera front: Print this flat side down