Raspberry Pi camera mount

prusaprinters

Update: After a few days installed on the printer the PLA is starting to take on a set and loosen it's grip on the camera casing and bracket ball. I am going to try printing the bracket and socket in PETG. This is a case and bracket with ball mount for a focusable Pi camera. There are two different types of frame mounts a tabbed version and ball version. There are two different sizes of frame mounts for 2020 and 3030 extrusions. To assemble you'll need two M3 x 16mm screws and M3 nuts. Fits are tight to prevent moving due to vibration. Print Settings Printer: HyperCube Evolution Rafts: No Supports: Yes Resolution: .2 Infill: 30% and 50% Filament: 3D Solutech PLA Real Black Notes: The case is printed at a minimum of 30% because at lower infill some small areas would not have any infill. The other parts are printed at a minimum of 50% for additional strength. The front and back of the case, and 3030/2020 tabbed frame mount are oriented correctly for printing and do not require support. The 3030/2020 ball frame mount requires support everywhere. The socket is oriented correctly for printing and requires support from the build plate only. The bracket should be oriented standing on the ball with support from the build plate only. The link is printed flat on the build plate. For tabbed frame mount: Print two links Print one of everything else. For ball frame mount: Print two links Print two sockets Print one of everything else. Category: 3D Printer Accessories