Raspberry Pi Cam V2.1 mount

prusaprinters

<p>Mount for Raspberry Pi Camer V2.1 for the front left corner on a RatRig V-Core 3.</p><p>Place the camera module into Pi_Cam_Back and push Pi_Cam_Front into place. I didn't need to use glue.</p><p>Insert he clips for the camera cable into the 3030 extrusion and turn 90 degree. They have a very tight fit!</p><p>Prints without supports.</p><p>Printed in PETG at layer height 0.2mm.</p><p>Hardware needed:</p><ul><li>M3 bolts for the camera mount, 2x M3x6 mm</li><li>M3 heat inserts for Pi_Cam_Back, 2x</li><li>M4 bolt, washer and locking nut for mounting the camera to the corner bracket, 1x M4x8 mm</li><li>M6 bolts and nuts for the 3030 extrusion for mounting the corner bracket, 2x M6x12 mm</li></ul>