Raspberry Pi Cam mount

thingiverse

I'm using a Raspberry Pi 3 camera mount for a camera similar to this one: https://www.aliexpress.com/item/Camera-Night-Vision-with-150-Degree-Wide-Angle-5M-Pixel-1080P-Camera-Module-Also-for-Raspberry/32728981532.html?ws_ab_test=searchweb0_0,searchweb201602_3_10152_10065_10151_10068_10171_10084_10083_10080_10304_10082_10081_10110_10137_10111_10302_10060_10112_10113_10155_10114_10154_438_10056_10055_10054_10310_10182_10059_100031_10099_10078_10079_10103_10073_10102_10052_10053_10142_10107_10050_10051,searchweb201603_2,ppcSwitch_5&btsid=d01ecd8a-5d1e-4f68-bf7f-2eb57f2c07cb&algo_expid=67db4c39-ff69-4a66-b54f-1bebf973f381-0&algo_pvid=67db4c39-ff69-4a66-b54f-1bebf973f381. The camera should be slid into the fittings on the outer part, and a flat cable is intended to fit through the gap in the front of the outer part, moving onwards to the backside and up onto the gantry of the printer. Two M3 screws and bolts are required for this setup. If you like my design, please consider buying me a cup of coffee! You can do so by visiting https://ko-fi.com/L4L5Q82S.