
Raspberry Pi Cam 50mm G-Clamp - Tilt Head with M3.5mm Thread and Nut
thingiverse
# 50mm Raspberry Pi Camera mount - Screw Clamp ## This is a remix of Emsity31's 17mm Raspberry Pi cam screw clamp mount. I have modified this design to fit my Artillery Genius by increasing the screw clamp to suit 50mm, as well as increasing the clamping area. Additionally, I have added the ability to tilt the cam, secured by a M3.5x25mm bolt and nut. Notes from Emsity31's original post that still apply: >As a bonus, the screw can be driven from both ends giving a 2 height position (to get the screw into the top thread either remove the front of the camera case or drive it upwards from the bottom with the screw inverted. TAKE CARE however not to push it through too far as it contacts the top case and may pop it off). I have included 2 body styles, one that accepts a steel M3.5x25 bolt and nut, and another that has a printed M3.5 nut integrated into the body alongside an optional M3.5x25 bolt. The latter isn't as easy to print as 1.2mm layer height will be needed to get the threads to work correctly - and won't be as strong, but may prove useful to those without the necessary hardware.
With this file you will be able to print Raspberry Pi Cam 50mm G-Clamp - Tilt Head with M3.5mm Thread and Nut with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Raspberry Pi Cam 50mm G-Clamp - Tilt Head with M3.5mm Thread and Nut.