Raspberry Pi B+/2 + HDD 2.5' case

pinshape

Summary Raspberry box based on this design: http://www.thingiverse.com/thing:604915 (Sleeve Case for Raspberry Pi B+) - Thanks Walter!! I recently added a case to fit a 2.5-inch hard drive with some spare space for a SATA-to-USB converter. I removed an external 2.5 HDD and its converter from the original case. You can see the LEDs shining through the case, probably displaying most of the available colors, which is a feature of the design creator. WARNING: This project is still in progress, meaning: There are no connector covers. In fact, they don't seem very useful since the initial design doesn't fully cover them. It wouldn't make sense to have a USB connector cover either, as each hard drive has its own position and type. This box fits tightly, but with some calibration and file refinement, I was able to fit my Raspberry Pi and HDD without removing the disk from its case yet. Perhaps scaling at 102-103% with Cura might help (that's what another user suggested for the original design). It has four small sphere legs for airflow. Instructions Position: The micro SD hole should be centered on the heat bed. Platform Adhesion Type: Brim (I recommend a large adhesion surface because it's tall and has a small base). You can see a picture of the adhesion surface I used. Support: None is required. The sphere legs provide enough support for the model to print without any issues.