Raspberry Pi 7 Inch Touchscreen display case swing out arm mount for 2020 (with STP files)

thingiverse

The text appears to be a README file for a 3D printed case modification for a Raspberry Pi 7" touchscreen display. The modification adds an adjustable arm that allows the user to easily access the SD card slot on the back of the device. Here are some key points from the text: * The modification uses M4 x 35mm cap head screws, M4 x 40mm hex head screw, M4 nylon lock nuts, M4 washers, and other hardware to assemble. * The case requires additional files from the original design by luc_e, including Raspi7inch_Case_SD_Access, Raspi7inch_Front, and others. * Assembly notes include using a 5/32" drill bit, file, Gorilla Glue, and patience to complete the project. * The author suggests using washers between plastic arms and mounting parts to avoid plastic on plastic contact. * The author recommends printing the parts with a lot of infill (50-60%) and a thicker wall configuration (2mm walls and 1.6 for floors/tops). * The biggest problem with printing the parts is that the washer indents may disappear due to supports, requiring filing. Overall, the text provides detailed instructions and notes on how to assemble and print the modified case, including hardware requirements, assembly steps, and printing tips.