Raspberry Pi 7 Inch Touchscreen display case

prusaprinters

<p>Easy to print solid Raspberry Pi 2 or 3, Official 7 inch touchscreen case. I wanted to keep the black bezel look of the screen and not making it bigger. You will need 4 M3x6 or 8 screws to secure the back cover. There is room inside for the power cables.<br/> I will use this as a kiosk display and NAS for my Kodi player I have cut out some areas at the back where I can add velcro strips to mount a 2.5 inch HDD.<br/> Enjoy and show off your builds and mods.</p> <p>Update 290516: Added 2cm Velcro lid and lid without HDD support.</p> <p>Update 310516: Added new case with little door access to the SD card. Still need small pliers or pincet but it's easier than unscrewing the back lid.</p> <p>Update 150317: Added split STL for front to enable print on small print beds.</p> <p>Update 010118: Added split STL for case Left and Right to enable print on small print beds</p> <p>Update 240418: Added the 123Design source files</p> <h3>Print instructions</h3><h3>Category: Electronics Print Settings</h3> <p><strong>Printer:</strong> Prusa i3 Plus</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> 200 um</p> <p><strong>Infill:</strong> 20%</p> <p><strong>Notes:</strong></p> <p>I used supports for the Case, others don't need support. To finish the print faster you can use 2 bottom and 3 top layers.</p>