Raspberry Pi 5 + Active Cooler screwless/snap-fit case

prusaprinters

Snap-fit 2-part case for a Raspberry Pi 5 with an Active Cooler fitted.I'm not sure if this would be considered just a remix but I've uploaded it as a new model since the changes are fairly significant and include:re-modelling of the USB connector ends of both the base and lid as the Pi 5 has a mirrored orientation of the connectors.addition of small screwdriver slots to allow the base and lid to be more easily ‘prised’ apart for access to the Pi.optional lid with the addition of break-outs for two camera ribbon cables.Self adhesive feet are used to raise the case above the surface to allow cool air to flow in from beneath the case.More detail on the usage context is available from this link.All the components use 1.75mm PLA and a layer height of 0.15mm with print details for each component produced on an i3 Mk3 shown in the table below.component file name/descriptionbrim (mm)supportfilament length (m)print time (i3 Mk3)RPi5_hex_base03.stl: case base with screwdriver slotsnonenone4.871h 47mRPi5_hex_lid03_rotx180.stl: case lid with just air vent openingsnonenone8.113h 19mRPi5_hex_cam_lid03_rotx180.stl: case lid with air vent openings and camera ribbon break-outsnonenone8.153h 25m