Raspberry Pi 4 SnapFit Case Geekworm X857 SSD Board

prusaprinters

<p>This is a Raspberry Pi 4 case that has been enlarged to accommodate a Geekworm / Suptronics SSD adapter board (tested on a X857 v2 board).</p><p>There are two versions - a standalone case and another that can be attached to a UK power socket to keep the Pi tidy and out of the way, rather than having it on the floor.</p><p>I use it as my main Zigbee2mqtt coordinator that acts as a hub for 80+ Zigbee devices that in turn connects to my Home Assistant automation software.</p><p>As an added bonus, I designed an antenna extender to help reduce interference from the Pi and SSD electronics, secured with small zip-ties.</p><p>I designed it to mount above the socket because sometimes they can be quite close to the floor, plus I wanted my zigbee2mqtt module be as high as possible to help with the Zigbee range.</p><p>The Top cover snaps into place so no screws are required.</p><p>Zigbee2mqtt - <a href="https://www.zigbee2mqtt.io">https://www.zigbee2mqtt.io</a><br>Home Assistant - <a href="https://www.home-assistant.io">https://www.home-assistant.io</a><br>X857 V2.0 mSATA SSD Storage Expansion Board - <a href="https://www.aliexpress.com/item/4000051492209.html">https://www.aliexpress.com/item/4000051492209.html</a></p><p>All printed using PLA with 0.2mm layer height.</p><p>I have included the model STEP files so that you can easily modify the model for your own needs.</p><p>Category: Hobby</p>