Raspberry Pi 4 case (with optional 30mm and 40mm fan mount)

thingiverse

Raspberry Pi 4 case featuring an optional 30x30mm or 40x40mm fan mount, requiring no screws for assembly. Print the case using PETG or ABS as parts of the circuit can reach temperatures up to 80°C. Adding manual support will make removal easier; check the preview for details. Modified on June 30, 2019 at 6:00 PM: * Adjusted spike position. Version 1.1 (July 3, 2019): * Improved airflow with larger top vent holes and an additional vent hole above the plugs. * Reinforced pillars between USB and Ethernet ports. * Added LED holes. * Middle support in latch holes for easier assembly. * Larger claws on latches to hold parts together more securely. * Optional passive cooling version without fan holes. Version 1.2 (July 3, 2019 at 11:40 AM): * Raised the design by 3mm to accommodate a higher heat sink. * Added one more vent hole for improved airflow. * Strengthened latches on the sides. Version 1.3 (July 4, 2019 at 11:10 AM): * Improved ventilation below the board with additional vent holes at three edges. * Added a grille below the chips for enhanced cooling. Version 1.4 (July 9, 2019 at 10:50 AM): * Slightly redesigned the connector side to accommodate power, HDMI, and headphone jack connections. * Added trailer elements below USB and Ethernet ports. Version 1.5 (July 13, 2019 at 1:25 PM): * Adjusted connector positions to match the documentation found on the Raspberry Pi website: https://www.raspberrypi.org/documentation/hardware/raspberrypi/mechanical/README.md Version 1.6 (August 22, 2019 at 6:12 PM): * Added a 30x30mm fan mount version for improved cooling performance.