Raspberry Pi 4 B SSD & 30mm Fan Case

thingiverse

This Raspberry Pi 4 case was designed with the goal of housing an SSD SATA drive and a 30mm x 30mm x 7.6mm PWM fan. I like running SSDs on my Raspberry Pi(s) that I have critical services running on like my MQTT broker and OpenVPN server because they are way more reliable than MicroSD cards. <b>There are two versions of the top, one with access slots and one without.</b> ADDITIONAL STUFF YOU WILL NEED: SSD/NAND SATA III 6Gb/s 2.5" 7mm Internal Solid State Drive USB 3.0 or 3.1 Type A to SSD/2.5 Inch SATA Hard Drive Adapter (I used a SABRENT branded one, and the Pi 4 can only support up to USB 3.0) 5V Fan 30mm 3 Pin PWM (I used the KKSB branded one on Amazon.com) Scotch SP951-NA Bumpers and Door Stops, 1/2" Round, Clear (4) (stick to bottom of case) M3 Tap & Plastic safe cutting Oil (I used Super Lube Oil with PTFE) 12 x M3 screws. (I used 8 dome head PC HD screws and 4 M3x6mm Pan head screws to mount the Pi) A set of heat sinks designed for the Raspberry Pi 4b.