Raspberry Pi 3A+ Case

prusaprinters

<p>This is a case for Raspberry Pi Model 3A+.</p><p>The dimensions of the case are 72 mm x 60 mm x 20 mm. It consists of two parts (a base and a lid) and has been designed to be fully covered with only cutouts for ports. It's easy to print and assemble. It doesn't require any additional screws or joints.</p><p>It fits Raspberry Pi 3 Model A+ and Raspberry Pi 1 Model A+.</p><h4>Recommended print instructions:</h4><ul><li>layer width: 0.4 mm,</li><li>layer height: 0.2 mm,</li><li>perimeters: 2,</li><li>solid layers: 5.</li></ul><p>Works very well with PETG and PLA. No supports are needed.</p><h4>Assembly instructions:</h4><ol><li>Insert microSD card into Raspberry Pi.</li><li>Insert Raspberry Pi into the base. Side with HDMI, microUSB and mini Jack ports should be inserted first.</li><li>Assembly lid. A little connector should be inserted in the place where the USB port is located.</li></ol><p>The lid should fit quite tight, but it should also disassemble from the base without using too much force.</p><h4>Optional modifications:</h4><p>The case can be easily modified even in the slicer. You can easily cut holes for GPIO pins, fans, air flow or various decorations according to your preferences.</p>