Raspberry Pi 3 B+ Bear Frame Case

thingiverse

Raspberry Pi 3 B+ Bear Frame Case This is a remake of the case found here: https://www.thingiverse.com/thing:2869086 I discovered that the original design interfered with my frame in two ways. 1. With the USB ports facing down, the case would interfere with my z-axis motor cable strain relief. For people not using a strain relief, this wouldn't usually be an issue. 2. When I rotated the case, it wouldn't clear the 90-degree plates - meaning it would sit too low on the frame. This redesign aims to solve both of these issues. You can now rotate it freely while still clearing any 90-degree plate. The tabs are also reduced, giving you more room to play with. In all, this case will give you more freedom. There are two options for the base: ## Option 1: Print the attached tabs along with the universal top. Note that you'll need supports directly under the tabs. No other location requires supports. BOM: 4 x M2.5x20mm bolts 4 x M2.5mm nuts ## Option 2: Print the detached tab base, universal top, and two tabs. This requires no supports. This will give you further color freedom, better matching existing bear parts. BOM: 4 x M2.5x20mm bolts 4 x M2.5mm nuts 2 x M3x6mm bolts 2 x M3 nuts ## Version History V1.0 Initial Release V1.1 [2019-02-09] Hole Fix Updated recess for screw holes in the top to be 0.4mm less. This fixes the bolts protruding too much from the base.