Raspberry Pi 2 Case with Camera Mount for Wanhao i3 Duplicator

thingiverse

The standard octopus installation method. A Raspberry Pi 2 is discreetly attached to the left side of the frame, with cables hanging down from it. Power comes in from behind the setup. A camera sticks out slightly above the printer head, capturing your beautiful prints. It only works with a Raspberry Pi 2 model. I'm not sure about other versions. You can copy and modify this design here: https://www.example.com Changes: * March 13th, 2016 - New bottom part is designed to be less tight. * March 13th, 2016 - The top part of the model now has a vented honeycomb pattern. Some people might think I'm obsessed with this design choice. * May 3rd, 2016 - The camera attachment point has been moved lower down on the bottom part to avoid any interference with the frame's bracing. Print Settings: Printer: Wanhao i3 Duplicator Rafts: It doesn't matter what setting you choose. Supports: You can set it to whatever you like. Resolution: 0.2 mm is a good choice. Infill: 50% is a good starting point. However, the infill density doesn't have a significant impact on the final print quality. Three perimeter layers work well for this setup.