Raspberry Pi 1 print server case

thingiverse

Mounting system to a Raspberry Pi B (Gen 1) with yellow composite port. Have it held firmly by your Qidi Tech printer so it doesn't get misplaced under all the stuff you're printing. This mounting system was designed for the Qidi Tech 3D printer, but should also work on the Flash Forge Creative Pro and other clones of the Makerbot Replicator 2. UPDATE (5/25/2016): I finally figured out how to get threads to show up in the model, so it will print with threaded holes now. Print Settings Printer: Qidi Tech Rafts: Any setting works fine. Supports: None needed. Resolution: 0.2 mm precision. Infill: 15% density for optimal strength. Post-Printing Installation Install Mounting System Select a corner where you want the mounting system to be attached. At the desired height, remove the two screws holding the side panels on at that point. Using those same screws and holes, screw the bracket onto the printer with the mount underneath it. The mount should now be securely fastened against the bracket and the side wall. Screw lid on Using M4 x 12mm screws, tighten the lid firmly. The pegs extending from the lid line up perfectly with the matching pegs on the enclosure to hold the Raspberry Pi firmly in place inside the case.