Rancher 4x4 Cooler

prusaprinters

<p>Add-on for the 3dSets Rancher 4x4. Replace your rear seat with a cooler.</p><p>This is all PLA+, 20% Infill.</p><p>Orient all parts for printing according to the illustration. You'll need Support Touching Buildplate for the Handles and the Cooler Bins.</p><p>Assemble all parts with CA glue.&nbsp;</p><p>The entire assembly should be assembled first and then installed. It is necessary to remove the windshield assembly and the front seats to do so.&nbsp;</p><p>The assembly positions itself so that the Cooler Top is flush with the rear interior surface and attaches to the angled walls behind the front seats.</p><p>Once assembled and placed into position, &nbsp; 4 &nbsp; 1.5 mm holes should be drilled to allow attachment. Cover the bolt heads (M2 x 6) with the snap-on Bolt Caps.</p><p>Assemble the Handle/Handle Latch with an M2 x 6 socket head capscrew. With the Handle installed into a door, apply a small dot of glue to the Handle hole, then screw in the M2 screw with the Handle Latch. &nbsp;Tighten and position the Latch so that it aligns with the Handle.</p><p>The Doors use a 1mm hinge rod, either metal or carbon fiber (I used a carbon fiber). Drill out and assemble the Doors to the Cooler Top.</p><p>The Cooler Bins are flush with the Cooler Top on the inside edges.</p><p>&nbsp;</p>