Ramps-fd and Radds enclosures.

prusaprinters

<p>UPDATE.</p> <p>((uploaded a v2 of the 40mm fan back plate . now easier to install . first plug in all cables then slide new cover over wires. ))</p> <p>(( i added a v2 of the radds display back.(v2 has a display bracket mount on both sides instead of one. to choose what side you like best ))</p> <p>(( i added a display back for the radds display. i remixed from and you can download the rest of the display case here-- <a href="https://www.thingiverse.com/thing:860709">http://www.thingiverse.com/thing:860709</a> ))</p> <p>(( i added a new lcd back plate (for reprap controller)</p> <p>remixed from and you can download the rest of the display case here-- <a href="https://www.thingiverse.com/thing:87250">http://www.thingiverse.com/thing:87250</a> ))</p> <p>(i added a ramps-fd box backplate with a 40mm fan for people that have 40mm fans.)</p> <p>(i added a new thicker walled ramps-fd box for those that are having trouble printing out the original one)---(ramps-fd box thick.)</p> <p>this is v1 of my ramps-fd enclosure with 30mm fan and eeprom hanger .</p> <p>i am upgrading my duplicator i3 with ramps-fd</p> <p>and am no longer using the stock psu.</p> <p>updated with a spare 700w computer psu i had laying around.</p> <p>that's why the box is just for the ramps-fd and display.</p> <p>the display case is for a geetech Smart controller With LED turn on control 12864 Version.</p> <p>the display and the box both have pivot points and uses gopro nuts and bolts.</p> <p>for people with different smart controllers.</p> <p>the display bracket is the same as a gopro base bracket. so you can also use a real gopro base with stickypad on the back of any display case you already have.</p> <p>(NEED TO KNOW)</p> <p>i designed this box for my ramps-fd that i slightly modified.</p> <p>originally all the connectors are facing away from the board .and this is just annoying because the box needs to be really wide to plug in the connectors.</p> <ol> <li></li> </ol> <p>==</p> <p>you can either bend the connectors upward very carefully and slowly with a plug attached to keep all the pins lined up.</p> <ol start="2"> <li></li> </ol> <p>==</p> <p>if your good at soldering . you can de-solder the connectors cut the pins at the bend. keep enough to re solder into the holes on the board so all white connectors are facing upward.</p> <p>and also created a Radds v1 enclosure for people that have Radds .</p> <p>the Radds box has a mounting area on the back plate for a 30mm fan and a micro usb to usb-b adapter and the on off switch that comes with the duplicator i3 . but it still does not house the psu ..</p> <p>i might make a different version to acomidate the psu. but not for now..</p> Category: 3D Printer Accessories