RAMPS Enclosure w/LCD Mount

thingiverse

This RAMPS case will be perfect for my MPCNC because I wanted a compact design that's easy to print, provides effortless access, and keeps my LCD right where it needs to be due to its short patch cables. The 4010 fan is used to cool the drivers, offering ample space from both sides for heat escape and wire management. Only two or four M3 x 15mm screws are required for the hinges, plus M3 x 25mm screws that secure the fan between the Lid and the LCD Ball mount. Since I've already designed and published an LCD mount for the RepRap Smart Controller, you can find the Receiver there, along with the case for that display via the link provided. I still need to design a case for the Full Graphic Smart Controller, but this should only take me about a day or so, and I'll upload it with the display case linked. There are two 5mm holes on the bottom of the base to fasten the enclosure to a surface using drywall or sheet metal screws, or whatever you find suitable. https://www.thingiverse.com/thing:2671990 Note - The image shows how I held a pair of pins in place that I soldered onto access the auxiliary 12-volt pins. This is how I powered my fan continuously using Dupont connectors on the fan leads. Edit - 3/28/2019 I designed the Full Graphics LCD enclosure and ball latch. I used four countersunk M3 x 8mm screws to mount the ball latch to the back plate and four more M3 x 12mm screws to mount the back plate to the face plate. Edit - 3/31/2019 I created a bar clamp mount for the RAMPS enclosure. Unfortunately, this is only compatible with the 23.5mm C Burly build. If you want to clamp on a different diameter conduit, you'll need to open the SCAD file and edit the barDia variable.