RAMPS adapter for Anet A8 (2016 version)

thingiverse

This mount enables you to install the RAMPS 1.4 board by utilizing the mounting holes from the stock controller board of an Anet A8 3D printer and the stock frame. Accessories include: - 3x M3 hex nuts - 3x M3 nylock hex nuts - 3x M3 washers - 2x M3 socket head bolts (L=25mm) - 2x M3 socket head bolts (L=25mm) - 1x M3 socket head bolt (L=40mm) - 3x M3 nylon PCB spacers (L=5mm) All three hex recesses in the mount are designed for use with regular hex nuts. The three holes aligned with the frame's hole pattern must be secured using a washer and a nylock nut, tightened carefully to avoid cracking the frame. The M3x40 bolt is intended for the "common" hole at the top-bottom corner of the picture. This means it requires a regular nut to secure RAMPS while also needing a nylock nut on the inner side of the frame to hold the entire assembly in place. Feel free to share any feedback, suggestions, or issues you may have.