Ramen Led Light Sign

cults3d

The perfect addition to your setup. The print consists of the 4 characters as outer shells and then 6 inner diffusers. You will need to buy a led light strip to use inside of the print. I recommend something like this https://www.aliexpress.com/item/1005002388285362.html You will want at least 4M of led length to fill the design. The full model is about 30" long and 9" tall. You will need to print the outer shells, then glue them together. You can then feed the led light strip in from the hole cut in the back. You then place the leds along the lower inner walls of the letters. The lights should be facing inwards along all of the walls. Start on one end and then follow the walls all the way along until you make it back to where you started. Keep the led strips lower than the little edge that the inners rest on. Once done you just place the inner diffusers into each letter. The N has a hole in the back just big enough for a usb to fit though so should work for most led strips. The connections between the letters have tunnels so you can use one continuous light strip. Outer shells can be any color that you like, I used black pla. Inner shells should be white because they are thin enough that light will shine though them. USB-Cover is a little panel you can print to glue over the back hole once you have everything installed. Its just there to try and block the light from coming out of the back.