Raise3d N2 snapcam ip camera mount

thingiverse

Human: For those with a Raise3D printer, I made this to mount the included IP camera in the case while being able to close the top cover and have a good view of your print. I will be doing a better version; this is my first design ever, and I've only had the printer for 5 days. N2 Plus users: Maybe the top of the N2 Plus is the same; then you can use it. But larger builds require a steeper angle. Print Settings: Printer: Raise3D N2 Rafts: Yes Supports: Yes Resolution: 100 microns (whatever resolution you want) Infill: 15 percent Notes: I had to resize and attach in the slicer. Change the dimensions on the camera bracket as follows: Width: 77mm Depth: 74mm Height: 33.70mm And the part that mounts to the printer: Width: 49.30mm Depth: 30mm Height: 50.30mm Attach with the shorter leg on the opposite side of the camera mount. Next version, I'll have a better design and correct scale. Then, I'll add an enclosure to hide the cable. Feel free to upload a better one for me to use too. (If you have low skill levels like me, just scale it and print the mount sideways and the camera mount right side up; you won't need any supports. Then, glue it.)