Radius Gauge Chips R1-30mm with Single Layer Color (no AMS!)

prusaprinters

UPDATE: There is now a “no_text” version for each style that comes without the text-object, making it easy to do a single layer swap (on Z0.3) instead. This remix uses only a single layer for the color change, making it a feasible print for single-extruder single-color printers (like mine).The classic folder contains chips that are identical except for the font and the single layer. The classic_top_concave and classic_top_convex models are compatible with the original model and only change the font to be a single layer color change.The remix folder is over-engineering a completely fine original model by adding a tab on the side and reducing the side-length by 0.1mm for easier retrieval and rotates the text by 90° for better readability when looking for a particular radius.The remix_bottom model over-engineers the bottom by removing one side (adding a small chamfer), making it easier to tip over a chip you want to retrieve.Print Settings: ChipsImport only geometry and import objects as parts (in OrcaSlicer that means clicking Yes 30 times)Change the second part for each object to the text color9999 Top Layers0.25/0.2mm layer height (important, the chips must not be taller than 2mm)Manually change sequence in your slicer so that the the text is printed last (so two color changes)Slow down your first layer by a lot (15-30mm/s max) so that the text turns out crispPrint Settings: BoxInfill: 15% Gyroid is sufficientWalls: 3-4Bottom/Top: 3-4Top Parts:Import only geometry and import objects as parts (in OrcaSlicer that means clicking Yes 30 times)Change the second part for each object to the text colorManually change sequence in your slicer so that the the text is printed last (so two color changes)Slow down your first layer by a lot (15-30mm/s max) so that the text turns out crispSource Codehttps://github.com/reemo3dp/radius_gauge/