RadioPi Zer0

myminifactory

To simplify, the RadioPi Zer0 is a USB A Addon Board V1.1 attached to a Raspberry Pi Zero W designed for radio transmission purposes. This device can be used as a music player, a small SOS beacon, and more. It can be plugged into any power supply with a USB port, such as a wall adapter or portable power supply. All I/O ports are accessible, allowing for wired programming without disassembly. There are many online tutorials available for programming the Raspberry Pi for radio transmission. The RadioPi Zer0 is highly mobile and versatile due to its compact design and ability to use a portable power supply. Antenna Installation Strip 4-5mm of insulation from a 12cm long 18 AWG wire. Solder the wire to gpio pin 7. Bend the antenna around the MicroSD card slot and pass it through the antenna port. Hardware * Raspberry Pi Zero W: https://www.adafruit.com/product/3400 * USB A Addon Board: https://www.amazon.com/MakerFocus-Raspberry-Required-Provide-Connector/dp/B077W69CD1 * MicroSD Card: https://www.amazon.com/Sandisk-Ultra-Micro-UHS-I-Adapter/dp/B073K14CVB/ref=sr_1_3?crid=1QTX1Y34ANTZT&keywords=16gb+micro+sd+card&qid=1558389825&s=gateway&sprefix=16GB+mi%2Caps%2C158&sr=8-3 * 18 AWG Wire: https://www.amazon.com/Ancor-Marine-Grade-Primary-Battery/dp/B000NUYGJI/ref=sr_1_7?crid=3CM2914Z3YPF5&keywords=18+awg+wire&qid=1558389936&s=gateway&sprefix=18AWG+Wir%2Caps%2C157&sr=8-7&th=1 * M2.5 x 12 Screws: https://www.amazon.com/uxcell-M2-5x12mm-Thread-Button-Socket/dp/B01AXUSWEM/ref=sr_1_5?keywords=m2-5+x+12&qid=1558389749&s=gateway&sr=8-5 Software * Raspbian Stretch: https://www.raspberrypi.org/downloads/raspbian/ * PiFM: git clone https://github.com/rm-hull/pifm * MPG123: sudo apt-get install mpg123