Radiation-Stand

prusaprinters

Stand for the "Drop & Run Cobalt 60 Source Cylinder".I have created a stand here for the STL. file from "Slyka" in order to be able to line up the cylinders neatly.If the STL.-file of "Slyka" is printed in 100% size, the 13 cylinders fit perfectly. There is a bit of play in case you haven't calibrated your printer perfectly and they will come out a bit bigger or smaller.Here is the link to "Slyka's" STL. file:https://www.printables.com/de/model/300072-drop-run-cobalt-60-source-cylinder@Slyka : Thanks for the great model you created. :)I like to use the cylinders to compare my filament with each other's colours and not have to print new test parts every time for colour combinations.So not only does it look nice and have a sense of comparison. It also protects against breakage. Better safe than sorry ;) Print settings:-Nozzle: 0.4mm-layer height: 0.3mm-Walls: 0.8mm / 2 lines-Top & Bottom thickness: 1.2mm / 4 layers-Infill: 10% / Cube-Printing speed: 120mm/sPrinting time: about 5.5 hrs.Filament usage: 126 gramsI used the SUNLU PLA "Grey" for this.Printed on the "Creality Ender 3 S1 Pro".