Radial Lamp

thingiverse

Download it on Cults3d, only free for a few time! https://cults3d.com/es/modelo-3d/casa/mic-lampara-radial (I'm sorry, I don't upload more designs to thingiverse, there is no support, they have left aside the app, the web and the platform in general.) Lamp with radial arms. Valid for any E27 lamp holder with lampshade thread (inner diameter of the lamp 43mm). Designed to fit the arms to the base without glue, you can glue them with superglue. It is easy to print but you must take some things into account to fit the pieces well: The thickness of the arms is 4mm, the same as the hole in the base, so if you print it unmodified the pieces will fit very tightly, or not at all. Print a test piece and if it fits too loosely, or not at all, you can adjust the thickness of the arms by editing the z-axis in "cure". I hope to upload more arms soon. You can play with the colors by interspersing different colored arms, like those of your favorite soccer team for example. I would really like you to upload your creation if you print this lamp, and let me know about any problems or suggestions! I hope you like it! 3D PRINTING SETTINGS Beware of sudden temperature changes when printing the arms, they could bend. I have had this problem with some pla. Once printed the arm bends with the temperature change. What I do right now is use low bed temp and let it peel off on its own. To print the arms I use two crystals, I change crystals between pieces to waste as little time as possible. If the arms don't fit well on your base, you can adjust their thickness by changing the size of the z-axis of the arm with the laminating software you use. They may not fit because of a base that is too high, you can also change the thickness of the base with the laminating software. Use the test pieces until you find the correct dimensions.