Radial Fan Impeller / Radialventilator Laufrad - 125RL-6X

myminifactory

This appears to be a set of instructions for 3D printing various parts for a motorized device, likely a pump or fan. The instructions are written in a mix of English and German, with some technical terms and specifications provided. Here's a summary of the instructions: **Part 1: Impeller** * Use one of three impeller files (0.8-0.9-1.0 mm) depending on perimeter width * Ensure part walls are solid without gaps inside * Perimeters: 2, Infill: 25% **Part 2: Hub Disc** * Use a hub disc file (125RL-6X) * Impeller and hub disc must be glued together **Part 3: Shaft Connector** * Use a shaft connector file (20.78 x 13.75 x 18 mm) * Pockets for M4 nuts and grub screws for motor shaft clamping * Available in two versions for different layer heights (0.2-0.25 mm) **Part 4: Connector Disc** * Use a connector disc file (Ø40 x 3mm) * Pockets for M4 nuts * Connector disc and shaft connector must be glued together in an evenly rotating position **Part 5: Motor Mount** * Use a motor mount file (175 x 67.5 x 15 mm) * Pockets for M5 nuts and hexagon socket head screws for motor clamping **Print Settings** * Printer: Anycubic Kossel Linear Plus or Velleman K8200 * Software: Cura or Repetier-Host/Slic3r * Material: PLA * Temperature: + Extruder: 200°C (Anycubic) or 190°C (Velleman) + Bed/Bett: 60°C (Anycubic) or 50°C (Velleman) * Layer height: 0.2 mm (Anycubic) or 0.25 mm (Velleman) * Perimeters: 2 * Solid top and bottom layers: 2 * Infill: 20% **Note** No support is needed for any of the parts.