Radial Fan Impeller / Radialventilator Laufrad - 125RL-6X

youmagine

It appears to be a set of instructions for printing and assembling a motorized fan. The text is in German, but I'll provide a translation and highlight the key points: **Translated Text** The impeller wheel is now available as a right- or left-turning version. The crucial parts 01 and 02 are mirrored and marked with the corresponding letter "R" or "L" in the download list. **Parts** 1. **Impeller Wheel** (Laufrad) * Ø 128 x 67.5 mm * Only one small ring is the connection to the print bed, make sure it sticks properly. * Retracting is needed to prevent stringing. * Choose one out of three impeller files with a suitable wall thickness for your printer (0.8 - 0.9 - 1.0 mm depending on perimeter wide). 2. **Hub Disc** (Nabenscheibe) * Ø 127 x 10.5 mm * Impeller and hub disc must be glued together. 3. **Shaft Connector** (Wellenaufnahme) * 20.78 x 13.75 x 18 mm * Pockets for 2 M4 nuts and M4x8 grub screws for the clamping of the motor shaft (Ø 3.2 mm). * This part is available in 2 versions, optimized for different layerheights: 0.2 and 0.25 mm. 4. **Connector Disc** (Verbindungsscheibe) * Ø 40 x 3 mm * Pockets for 3 M4 nuts. * Connector disc and Shaft connector must be glued together in a evenly rotating position (check the YouTube video). 5. **Motor Mount** (Motorhalter) * 175 x 67.5 x 15 mm * Pockets for 2 M5 nuts and hexagon socket head screws M5x25 for the clamping of the motor (Ø 35.5 mm). **Key Points** * Make sure to print each part with the correct orientation and settings. * Impeller wheel and hub disc must be glued together. * Shaft connector and connector disc must be glued together in a evenly rotating position. * Motor mount requires M5 nuts and hexagon socket head screws for clamping the motor.