Radeon Instinct MI8 DisplayPort PCIe bracket

prusaprinters

<p>Hi everyone.</p><p>It's my first upload here so any suggestions for improvements are welcome.</p><p>&nbsp;</p><p>There was this special deal for a Professional-grade Radeon Instinct MI8 (basically a R9 Nano without a fan and with only 1 monitor-out: DisplayPort) for around a €100 and I just could not let it slip by.<br><br>The problem is, that the GPU's stock bracket is obstructing the single DisplayPort socket.</p><p>I took the <a href="https://www.thingiverse.com/thing:4852924">XFX RX 550 standard height bracket</a> (by wmlowder) model so I didn't have to start with an empty canvas and went away at modeling. I couldn't find it here on PrusaPrinters and gave up after a few minutes.</p><p>The ventilation cutouts are copied by taking a picture of the original bracket, then doing some cleanup and converting it to svg.<br><br>Since I'm using Tinkercad (I don't feel comfortable enough with constraint-based modeling) it took a few test prints to get the holes just right.</p><p>You can see a few prints with greater thickness - I made those to increase stiffness, but they didn't fit in the PC Case.</p><p>I've printed my working piece in Fiberlogy EasyPETG Black.</p><p>The file I printed is the <strong>MI8_PCIe_Bracket Thin side-mount - it's supported my GPU for a few days now and seems fine.</strong></p><p><strong>I also provide a file with thicker side-mount but I haven't actually printed it.</strong></p><p>0.4 nozzle</p><p>Sliced in Cura at 0.6 outer and inner line width</p><p>Support interface line width: 0.26</p><p>Other lines at 0.4</p><p>I reduce speeds with these settings.</p><p>Please take a look at the screenshots if you need to see them.</p>