RackPi with Middle Atlantic Rack

thingiverse

While I like the RackPi, it was originally designed for European makers. This remix uses a Middle Atlantic Rack that you can buy from B&H https://www.bhphotovideo.com/c/product/228478-REG/Middle_Atlantic_FK2_UCP_FK_2_Swinging_Frame.html And using some M.2 screws you can buy from Amazon for attaching the Pi to the shield https://www.amazon.com/dp/B07D5W1WCP And some #6 screws to attach these shields to the rack https://www.amazon.com/dp/B00F3599ZE you've got yourself a nice 10-pi rackmount just like in the original Thing. The changes I made are to - take 1mm off two sides of the shield - move the screwholes out slightly and change their diameter to #6-compatible I only ported three STLs: those for the Raspberry Pi 4, the Raspberry Pi 3 (which should also work for the 2), and a blank shield. I had friend print these, so I'm not sure about the printer specs he used.