Racing Quadrocopter Stable

thingiverse

Prints:\n4 x Arm\n1 x Top Cover\n1 x LEDHolder (optional)\n1 x camholder (optional, for FPV use only)\n2 x Lower Base\nAdditional parts used include:\n6 x aluminum tube 30mm x 5mm\n4 x aluminum tube 9mm x 5mm\nM3 Screws, nuts, and washers were also used.\nElectronic components used include:\nEngine: 4 x 2204-2300 KV motors\nESC: 4 30A speed controllers\nFlight Controller: CC3D\nFPV Bundle Set with goggles, video TX & RX, and 5.8GHz 32ch Video TX & RX from Quanum\nHobbyKing HK6S 2.4Ghz FHSS 6Ch Tx & Rx were used for radio communication.\nFour Blue LED rear lights were installed.\nLipo batteries with a capacity of 3s 2200mAh and 4s 2650 mAh/1400mAh were used.\nFour 6" 2/3 blade propellers were mounted.\nDimensions:\nProp center to center, length: 225mm\nWidth: 235mm\nLower base dimension: 230mm (adjustable, but limited by ESC size)\nPrinting details:\nPrinter: replica Prusa I3\nRafts and supports were not used.\nResolution: 0.22mm\nInfill percentage: 35%\nMaterial notes: PLA was used for arms, ABS optional on base and top.