Raccoon in Pedal Bin

thingiverse

A small raccoon lives in a trash can. It presses the pedal and the lid pops open with its arms extended. All files are designed to be printed at their original size, using a 0.2mm layer height from a 0.4mm nozzle, so feel free to experiment! + *RIPB_Bin_Base.stl* is the main part of the pedal bin and can be printed without support, but some extra support may be needed near the pedal-hole. + *RIPB_Bin_Lid.stl* is the lid of the pedal bin and can also be printed without support. + *RIPB_Bin_Pedal.stl* is the pedal, which should be printed sideways for a stronger connection. It requires some support. + *RIPB_Bin_Raccoon.stl* is the raccoon itself and should be printed on its back. Support is necessary only for its back; its head, arms, and legs/feet can print without support. Depending on the quality of the print, the bin_base may need some sanding inside to prevent the raccoon from getting stuck, but this was not a problem in my case.