R2D2 Echo Dot 3rd Gen Stand

thingiverse

Most files are simply enlarged by 121% to fit the third-generation Echo Dot. I've modified the Alexa part, R2D2_Alexa, so that its cutout matches its power port, and made it slightly taller to ensure the head sits flush. Unfortunately, I'm not entirely satisfied with the mesh due to my limited experience in meshbending, but the errors are contained within, making them less of an issue. I've also designed the "Adapterring" and the "Fixateur". The Adapterring is situated between R2D2_Alexa and R2D2_Head, preventing the head from sliding around. It might be slightly oversized, requiring a small segment to be cut out before it functions properly. The Fixateur is secured to the underside of R2D2_Alexa using two flathead M4x8 or M4x10 bolts, depending on your preference. These hold R2D2_Alexa firmly in place against r2d2_main_body without requiring glue. I've included .step and .f3d files for anyone who'd like to make adjustments. Update 12/06/2020: Several people have asked about the main body's support, so I've uploaded five images illustrating how I would position the supports. An .idea file has also been added, which should include the supports when opened with Ideamaker (my preferred slicer). If your slicer supports tree supports, you might consider using them for the outer and inner ring; just remember to support the overhangs on top of the body as well, particularly where the middle foot is located.