R/C crawler 2.2 beadlock wheels

thingiverse

R/C crawler 2.2 beadlock wheels. Designed specifically for use with stock Axial Wraith hubs, these wheels may also work with Vanquish hubs. The design consists of five individual parts that can be printed without the need for supports. Two different styles of outer beadlock ring faces are available: flat or reinforced. Four distinct options are offered: plain (no markings) and foam density markings in soft, medium, or firm densities marked as S, M, and F respectively. For added convenience, I use the face with markings on the inner face and a plain one on the outer face. The foam density markings enable easy identification of different foams used between front and rear wheels during maintenance. The overall weight of each wheel is approximately 65g including screws, achieved at around 40% infill and three perimeters. M3 screws are required for the beadlock ring faces, while M2.5 screws are needed for the hubs. ***I have had limited experience with these wheels but so far, I haven't encountered any issues (using Voodoo pins & Crawler Innovations DD foams on an XR10). Note; The DD foams were trimmed to accommodate the rim within the foam (difficult to explain, and I forgot to take a photo). Feel free to leave comments or feedback.