QuickCam 9000 Telescope Mount

thingiverse

Dismantle your Logitech QuickCam 9000, following Gary Honis' instructions at http://dslrmodifications.com/Pro9000mod.html. Disassemble the lens to remove the IR filter; be cautious as it has a delicate coating and is challenging to remove. If you cannot detach it, use the filter cap CCD cover to seal the CCD surface from the rest of the case. Re-purpose the Logitech QuickCam 9000 into a high-quality prime focus telescope eyepiece for astrophotography by dismantling the camera according to the instructions provided at http://dslrmodifications.com/Pro9000mod.html. Separate the lens from the camera body, taking care not to damage the delicate coating on the lens's inner surface; removing the IR filter is crucial for optimal results. Use a sharp knife to carefully pry the lip off the end of the housing and extract the filter. Alternatively, seal the CCD surface using the filter cap cover if removal proves impossible. Clean the groove on the filter cap where it meets the CCD, ensuring it provides a snug fit over the sensitive sensor area. Designate a space in the camera's rear for a 40mm cooling fan; consider running it from the USB port to minimize vibrations. Keep all screws intact and reuse them during reassembly; secure your modifications using the same quick-release mechanism originally designed for dismounting components within this digital photography tool. Prepare yourself for amazing astrophotography shots, free from distortion and aberration – enjoy precise results with this transformed piece of technology! Print using a black or dark plastic material to effectively minimize unwanted light entry; a three-sided setup (top/bottom/sides) will maximize ambient light reduction, utilizing at least 20% infill density ensures solid durability for long-lasting quality prints that withstand daily handling stress without showing excessive wear signs on printed designs or parts needing repair work afterwards!