Quick release canopy mounts for Specter V2 / NME

thingiverse

Quick release canopy mounts for Specter V2 / NME Didn't like the stock canopy attachment so here goes... LIABILITY DISCLAIMER: Use this model at your own risk. By proceeding you acknowledge that the creator is NOT LIABLE NOR RESPONSIBLE in any way for any subsequent damages or injuries. The canopy should almost just fall into place when combined with magnetic front canopy mounts. Print with TPU (80'ish duro) - flexible material highly recommended for vibration dampening and a bit of give. Materials required ... ----- - 2x m3x30 button head screw (socket head may not provide enough clearance for loxx ball shaft) - 2x FAS19-2063 Loxx Large Head Button https://jtsoutdoorfabrics.com/loxx_black_chrome_large_head_button - 2x FAS19-2073 1/2" Loxx Wood Screw Stud (ball) https://jtsoutdoorfabrics.com/12mm_loxx_black_wood_screw_stud Print ONLY in the orientation shown - this is important - the durability of the part relies on the m3x30 screw clamping the layers together. No supports required. Assembly ... ----- - part has a flat boss on one side - this contacts the servo mount and prevents the part from turning during installation - part has a cut out for the servo cable - attach the part to the frame w/ the m3x30 button head bolt - make it snug, not gorilla tight, use loctite as directed - use a 9mm socket driver to install the ball - don't rush, try to keep it straight - it should fit nicely into the recess - find the spacer washer that works best for your canopy, the canopies are all a little different and may require different spacers to close properly. Use at least one to protect the canopy's paint finish. Look closely in the picture - note the orientation of the flat nut on the inside of the canopy which secures the button. The flat side should be touching the canopy. Again look closely at the picture. Big thanks Mike W. (ledfoot) and Diego A. (Diego40c) for extensive testing and feedback during development. Enjoy.