Quest 3 Magnetic Lens Adapter

thingiverse

I took the quest 3 clip template from: https://www.printables.com/model/612450-quest-3-lens-adapter-templateTook the lens mount from: https://www.thingiverse.com/thing:5319065Mashed them together and made the mount for Quest 3, so if you printed the lens holder for Quest 2 for the lens mount above you can just print this to use the same magnetic lens on the Quest 3. For those that want to use the thinner lens piece, please reprint a modified mount for Quest 2 from hereYou can print at 20% infill. Model is for right eye, mirror it to get the left eye. FYI, I print left and right sets in matching colors so I know which eye is which without having to label anything. 10/15/23: Update to have a curved transition from the mount to the template to allow support-less printing. The inside of magnet recess holes might not look great but once you fit the magnet in you won't notice it. 10/18/23: Increased the clip height slightly (half a millimeter), and modified the original lenspiece to reduce the thickness10/19/23: Increased thickness by 0.4mm for the mount so the magnet hole back isn't too thin.10/24/23: Uploaded 20231024_ProperClipFit.stl. This contains the curved template from the printable remix source and fits much better and less prone to snapping and accidental removal. Recommend sanding the clip side as the layers will not form perfect rings and have noticeable steps. Also adjusted the positioning to closer match the 65mm PD zenni lens10/25/23: Uploaded 20231025_AsThinAsItGets.stl. If you have 5x1 mm magnets instead of the 5x2 mm, you can print this one to reduce the thickness even further.