Quest 3 magnetic Gunstock - compact and lightweight - Buttstock attaschment soon !

prusaprinters

A Quest 3 Gunstock - adjustable in length - soon I will add a buttstock (work in progress). The front and back part are hold by a magnet and are easy to detach. The fits for the controller can be adjustet in lenght along the rail system.I designed the controller mounts to fit (AMVR) knuckle straps. They also fit the original controller well.  I used one a 25mm (radius) x 7 mm (depth) magnet with 30kg of force. (Amazon: https://www.amazon.de/dp/B0C61QL9LD?ref=ppx_yo2ov_dt_b_product_details&th=1) For the other side you can use a flat washer (25 - 30mm of diameter).To fix the washer and the magnet you can either use glue or a screw (3,5x20mm for the washer). I used 30 % infill (Gyroid), PLA. I printed with support.The models have some tolerance for a clearance fit. 100 % should fit, but might be a bit tightly in the first time. Maybe scale the front and rear base to 100,5 % or 101%.Print the Pins 2 times; one for the front and one for the rear are enough. You can print 2 more for a even more tight fit, but in my opinion thats not necessary. The buttstock will be added soon (work in progress). The pictures show my prototype. After printing I improved the model a bit.