Quest 3 Controller Mounts for Magnetic Gunstock (Sanlaki style, top-side mounting)

thingiverse

This is my first design of gunstock controller mounts for the Meta Quest 3 VR headset and the popular Sanlaki gunstock design.As it turned out the slide-in concept with rubber pads does not work well for the dominant hand controller and heavy gunstocks, as the Sanlaki design with steel pipes. The mount does wobble when moving the gunstock rapidly.Please see the successor design, which fits super-tight: Quest 3 Sleek Gunstock Controller MountsRemarkPlease note that the controller mounts have slightly larger pipe exerts than the original Sanlaki design. The controller mounts have been designed for my Sanlaki remix Magnetic Gunstock (Modified & Optimized), which uses slightly larger pipes.But according to feedback received the pipe exerts fit well for the original Sanlaki design, too.DescriptionBeing not patient enough waiting for Quest 3 Sanlaki gunstock controller mounts to be released, I decided to design the mounts myself.The mounts have been created using the model Quest 3 right controller from paul_delta, providing a perfect fit. There is no screwing required or whatsoever, one model per controller mount.I also did create a remix-ready version of the [Quest 3 Controller Mounts], w/o any additional parts, just the mounts. Feel free to use for your remix.AssemblyUse one-side adhesive and very thin rubber pads or tape (1,5mm thickness) for optimal stability, as shown in the pictures. With two of these pads the controller fits super-tight.Print settings0.4mm nozzle and 0.2mm resolution works. Anyhow I would recommend 0.15mm resolution for best results.I did use 20% gyroid infill and did print with Tough PLA. No problems, very stable.All models should be printed with supports, due to the complex geometry with overhangs. I would recommend a brim for better adhesion of first layer.