Quattropus Street League (source one arms)

thingiverse

Here is a Street League option for people with the TBS Source one deadcat arms. the frame is made up of 3 metal plates with the arms sandwiched between the two bottom plates. there is files for a arm guide that will also go between the plates. there are 4 parts to that guide. a middle part that will be printed with a stiff material like PLA and 3 soft parts, one top and two bottom for some vibration dampening (i have it drawn the other way in my rendering) it will work either way. the camera mount on the top will house a full sized air unit and camera, also has spots for the factory antennas. I put some thermal paste on the AU between it and the metal top plate for a little extra cooling on the AU. the camera mount will get attached to the top plate with four 3mm screws. you have to screw your standoffs to the top plate before you attach the camera mount. the battery box has recessed holes in it that will key in with all the arm screws, use cap head screws on the arms. I cut the plates out of 12 gauge steel. with all the prints at 3 walls and 20% infill with a .06 nozzle. it is just under weight with no leds on it. I am open to suggestions to better the design.