Quadrocopter - Explorer V2

thingiverse

https://youtu.be/phaz_exCX5k !! Important !! The rear arms have a critical difference: back-arm-left: features tilt capabilities. back-arm-right: does not have tilt. You must select one and mirror its configuration in Cura for optimal results. This is the most advanced and stable version of my Quadrocopter - Explorer V1. http://www.thingiverse.com/thing:1998043 To accommodate a maximum print area of 190mm, I've split the top and bottom parts into separate entities. Required Components: * 4 M6 screws and bolts for the arms (20 mm) * 16 M4 screws and bolts for the motors (16 mm) * 4 M4 screws and bolts for the top joiner (12 mm) * 4 M4 screws and bolts for the bottom joiner (12 mm) * 2 M4 screws to join the top and bottom front (12 mm) * 5 M4 screws to connect the core and bottom parts (16-18 mm) * 2 M4 screws to secure the top core (12 mm) * 4 M4 screws and bolts to fix the BEC and FC (Naze32), using a spacer (20-30 mm) Don't forget to secure the cables over the arms. I recommend the following components: * Naze32 full (30mm x 30mm distance between holes) * BEC (30mm x 30mm distance between holes) * 1000kv motors * 10x 45 propellers * 30A ESCs * 4S 5000mah battery pack * Turnigy 9x transmitter