Quadcopter Frame

thingiverse

This upgrade is designed specifically for the G-Intrude micro quadcopter, but it may work with any quadcopter board featuring 3mm holes spaced 23mm apart. The intended application is for 7mmx20mm motors and 55mm props. Parts List: G-Intrude Quadcopter (or equivalent model): https://www.amazon.com/gp/product/B010SNM4YS/ 4x Hubson X4 H107L Motors: https://www.amazon.com/gp/product/B00SKVZMU4/ Hubson X4 H107 Props: https://www.amazon.com/dp/B00GZHI75C Replacing the ~6x12mm motors that come with the G-Intrude with 7x20mm motors is a significant upgrade, so it's essential to pair them with a larger battery. I'm using a 680mAh Lipo, which is a considerable increase from the ~100mAh stock battery. This has resulted in flight times of over 20 minutes. Update: A modified version for 10mm diameter motors has been added as requested. However, please note that this version hasn't undergone test prints, and I don't have access to 10mm motors for testing. If tolerances are off, you can try wrapping the motors with tape for a tighter fit or bore out the holes using a pencil wrapped with sandpaper. Print Settings Note: Setting top and bottom layers to zero allows for an infill pattern to be used; however, ensure that the mounting points have sufficient material to sit on. A stiff filament material is highly recommended.