Quad Rotor Frame for Blade 200QX vitamins V.1.5

thingiverse

Human: Okay, So I took a major crash and severely damaged two arms and the base of the frame after a 30-foot fall. After redesigning a few things, it's flying smoothly again! Flying this one is incredibly exhilarating!\n\n \n \n Building Instructions\nDon't fly with the LEDs installed... instead, you can easily feed them through the arms and secure them in place along with the motor wiring using zip ties. The stands pivot perfectly around M3 bolts, allowing you to mount the control board to the stands while fastening the base to the top casing using the small shiny bolts originally used for this purpose. Make sure to mount the gyro securely using 8mm m2 screws that pass through rubber grommets; they should fit snugly without compressing the grommets to prevent unwanted vibrations. The "all-together-now.stl" file can be printed within a 150 x 150mm print area! You will need:\n24 M3 bolts (15mm)\n4 M3 bolts (30mm)\n4 M2 bolts (8mm)\nvitamins from the Blade 200QX\nA velcro strap to secure the battery\nA 3D printer\nSomething I've overlooked, maybe!